Installing Batteries - ION SUPERSIGHT Guia De Inicio Rapido

   
  
Using SUPERSIGHT
   


Installing Batteries

  
1. Slightly push on the latch and pull up on the door to
open the battery compartment.
2. Load the batteries in the proper direction as shown
inside the compartment and close the battery door.
Note: Remove the alkaline batteries when SUPERSIGHT will
not be used for a long period of time. Rechargeable AAA alkaline or
NI-MH batteries can be used however do not mix and match
different battery types together.
Note: If the battery level is low, a black battery symbol will appear in
the lower right corner of the screen, indicating the batteries need to
be replaced.
Importing Images to a Computer
1. Power on SUPERSIGHT.
2. Connect the included mini USB cable from SUPERSIGHT to your computer's USB port.
When connected, the SUPERSIGHT screen will go to USB connection mode.
3. On Windows, go to your Computer drives section to locate the micro SD card, which will
appear as a removeable drive. On Mac OS X, the micro SD card will appear as a
removeable drive on the desktop.
4. Double click the removeable drive icon and open the DCIM folder to locate your photos.


7