Care And Maintenance - EuroSteam STEAM EZEE 601 Guia Del Usuario

7
Crease head tted
Clothes ironing
A�ach the metal head and hang the garment on a hanger hold the item at the lowest point gently
pull down and run the steam cleaner down the item slowly un�l you have cover all areas. Creases
will be removed and the item will be refreshed. Leave in a warm environment the completely dry
out.
Using the plastic crease head
A�ach the metal ironing head and crease head to the steamer. Hang the garment on a hanger. Pull
the lever on the crease head which will open the gap between the iron and crease head and allow to
close over either side of the area where you require a crease for example the legs of trousers. Hold
the item at the lowest point gently pull down pressing the steam bu�on as you move.
Using the wool bush and upholstery heads
These heads can be used to remove small areas of soiling or stains on heavier materials such as
linen, wool and upholstery. A�ach the head of choice depending on the type of material and work
on the area. The brush can be used to apply steam whil gently brushing in all direc�ons which will
in most cases loosen the cause of the soiling. Use a piece of clean white linen to dab the area a�er
brushing and steaming to remove the residue.
Speci cations
Model:
Rated Voltage 110V

Care and maintenance

Rated Frequency 50Hz/60Hz
Rated Power 1500W
Care and maintenance.
After use
Empty the water tank and replace, then turn the steam cleaner on and press the steam bu�on
several �mes to remove and residual water or moisture.
Clean all parts including the steam head using a clean cloth rinsed in warm water and mild
detergent and dry thoroughly.
Do not immerse the steam cleaner in water .
Store all components and the steam cleaner in its travel bag, and the original packaging when not in
use.