Ecg Record; Switch Off; Alarm Information - KONTROLab EC-300 Manual De Usuario

5.7 ECG Record

As the above figure shows, the ECG record includes: date and time, ID number, owner
(written by doctor), name (written by doctor), type (written by doctor), weight (written by
doctor), sex, age, sensitivity, paper speed, filter settings, lead name, 1mV calibration pulse,
ECG, heart rate, and model of the equipment.
At the beginning of each lead's ECG, lead name and 1mV calibration pulse is printed. On the
top of the ECG record of each lead, sensitivity is marked. The sensitivity may be different, for
it can be changed during the course of recording.

5.8 Switch Off

When built-in battery pack used, press
ECG record.
When mains supply used, press
off the mains supply by pressing the switch on the left side of the unit. Pull off the plug from
the outlet last.

6 Alarm Information

Alarm information will be displayed on the LCD screen when there is something wrong. Alarm
information provided by the electrocardiograph and corresponding cause is listed in Table 6-
1.
key directly to turn off the unit after finishing
ON/OFF
key first after finishing ECG record and then switch
ON/OFF
29