Kenmore 116.26212 Manual Del Propietário página 8

CANISTER
I. Open the canister hood+
2. Check to see that the dust bag is proper-
ly instatled. See BAG CHANGING for
instructions_
3. Check to see that the motor safety filter is
properly installed, See MOTOR SAFETY
FILTER CHANGING for instructions
HOOD AND TOOL
STORAGE COVER
It is normal for the canister hood and tool
storage cover to come off when opened fur-
ther than needed+ Line up the hinge slots,
insert the hinges into the slots, and close
the hood and tool storage cover to reinstall.
Ul
I CAUTION
Never open canister hood with the tool
storage cover open+ This will help to
prevent damage from occurring to the
canister hood and/or tool storage cover.
HOSE
Latch
Notch
1+Line up the
hose latch tab
and notch in
canister hoed
and insert hose
into canister until
it snaps in place.
To remove: Lift
hose latch tab
upward and pull
up on hose
2+ Insert
handle into
wand until
lock button
snaps in
place+ Be
sure hose
is not twist-
ed.
To remove:
Press han-
dle release
button and
pull up on
handle.
Lock
Handle
Quick
To store: Disconnect hose from wands and
canister to prevent stress on hose during
storage. Store hose in a loosely coiled
position so the hose covering is not
stressed+