Kohler K-752 Guía De Instalación Y Cuidado página 5

Cumple las normas de la FCC e IC (cont.)
1. Este aparato no debe causar interferencias perjudiciales, y
2. Este equipo debe aceptar cualquier interferencia recibida, incluyendo las interferencias
que causen un funcionamiento no deseado.
NOTA:
Cualquier modificación o cambio que no haya sido aprobado expresamente por la parte
responsable de la conformidad puede anular el derecho del usuario de utilizar el
producto.
Enunciado de exposición a la radiación de FCC e IC para dispositivos móviles
Este equipo cumple con los límites de exposición a la radiación de FCC e IC para un
ambiente no controlado. Este equipo se debe instalar y hacer funcionar con una distancia
mínima de 7-7/8" (200 mm) entre el radiador y el cuerpo. El transmisor no debe ubicarse
ni hacerse funcionar con ninguna otra antena o transmisor.
Range and Function Disclaimer
BLUETOOTH ® is the name for a short-range radio frequency (RF) technology that
operates at 2.4 GHz. The effective range of most BLUETOOTH mobile devices is 30 feet
(9.14 meters). BLUETOOTH is designed for very low power use. The compatibility of the
BLUETOOTH amplifier interface to mobile/portable devices differs according to the
various individual devices and, in particular, may vary with different software versions
for a device. The normal mobile device BLUETOOTH range can be up to 10 meters,
however, placement of your mobile device and the BLUETOOTH amplifier's installation
environment will impact your reception range.
Water and walls can act as blocking agents to the BLUETOOTH signal that your mobile
device is using to broadcast to your BLUETOOTH amplifier. Therefore, selecting an
installation location that removes these range blocking obstacles will increase the
effective range and performance of your BLUETOOTH amplifier.
You can test your BLUETOOTH reception by performing simple range tests using your
mobile device prior to performing a permanent installation. The best way to make use of
the short BLUETOOTH range is to make sure your BLUETOOTH amplifier is as close to
the BLUETOOTH transmitter (mobile phone, tablet, etc.) as possible. The less distance
between the two devices, the greater will be the reliability of your BLUETOOTH audio
signal, and the less distance means less obstacles in the medium through which the
transmission is passing, so there is a reduced chance of audio signal loss.
The compatibility of the BLUETOOTH amplifier to mobile/portable devices differs
according to the various individual devices and, in particular, may vary with different
software versions for a device. All functions are based on industry-wide communications
standards. Compatibility between the BLUETOOTH amplifier and mobile device is
therefore largely dependent upon the software version of the mobile device. Other
factors (e.g. installation location, walls, distance) mean that in individual cases, sporadic
impairment of functions may occur in devices that otherwise function reliably. Not all
functions are supported in all countries.
Because of these reasons, Kohler Co. can assume no guarantee for the unlimited
compatibility and functionality of your mobile device in conjunction with the
BLUETOOTH amplifier.
________________________________________________________________________________
The BLUETOOTH ® word mark and logos are registered trademarks owned by Bluetooth
SIG, Inc. and any use of such marks by Kohler Co. approved suppliers is under license.
Other trademarks and trade names are those of their respective owners.
Kohler Co. 5 1193890-2-B