Safety Information - TP-Link M7350 Guía De Instalación Rápida

on your phone.
2. Go to Dial-up and enable the Data Roaming option.
A4. Check Mobile Data
• Refer to Q1 to log into the web-management page on your phone. Go to Dial-up to verify that Mobile
Data is on. If not, enable this option.
A5. Check Data Limit
• Refer to Q1 to log into the web-management page on your phone. Go to Device > Data Usage Settings
to check whether your data usage has exceeded the Total/Monthly allowance.
Q4. How do I restore the Mobile Wi-Fi to its factory default settings?
• With the Mobile Wi-Fi is powered on, remove the cover. Use a pin to press and hold the RESET button until
the "Power Off" appears on the screen OR all LEDs turn on momentarily.
Note: Restoring the Mobile Wi-Fi to its factory defaults will clear all previous settings and you have to reconfigure it.

Safety Information

• Keep the device away from water, fire, humidity or hot environments.
• Do not attempt to disassemble, repair, or modify the device.
• Do not use damaged charger or USB cable to charge the device.
• Do not use any other chargers than those recommended.
• Do not use the device where wireless devices are not allowed.
CAUTION: RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORD-
ING TO THE INSTRUCTIONS.
Please read and follow the above safety information when operating the device. We cannot guarantee that no
accidents or damage will occur due to improper use of the device. Please use this product with care and operate at
your own risk.
4
English