5. Getting Started
Power On / Off
Power On: Press and hold button
for 4
seconds to turn on the device.
Power Off: Press and hold button
again
for 4 seconds to turn off the device.
After powering on the Aukey, viewing mode
is initially set to Full Color Mode. For optimal
viewing keep the Aukey approximately 1" above
the viewing object. Do NOT put the Aukey on
the object directly.
Setting the magnification
There are 2 digital magnification levels by
pressing the
button. The total combined
optical and digital magnification ranges from
1.9X-13.6X magnification.
-Users can also change the distance between
the camera lens and target object for getting
intermediate degrees of optical magnification.
English
-6-