Clearing A Jam - Paslode PF250S-PP Manual Del Usuario

TOOL OPERATION-continued
Tool Free Depth of Drive Adjustment
Thumbwheel
v v v v

Clearing a Jam

The PF250S-PP is equipped with a tool free
Quick Clear feature to allow you easy access
to the nose and magazine for clearing a jam.
Quick Clear Magazine Removal
1. Disconnect the air supply from the tool and
all the nails from the magazine.
2. Turn the Quick Clear knob fully counterclock-
wise.
3. Slide the magazine back in the mounting bracket
until the front of the magazine clears the guide pins
located on the nose. Pivot or remove the magazine
for inspection.
Turn thumbwheel
counter clockwise
to decrease
fastener depth.
Turn thumbwheel
clockwise to
increase
fastener depth.
3. (continued)
Remove the jammed fastener from the nose of the
tool and push the driver up into the tool.
Bias Lever
Inspect the bias lever in the nose for
proper operation.
Quick Clear Magazine Installation
1. Place the large magazine mounting hole
over the mounting lug.
2. Align magazine mounting holes with the
guide pins.
3. Slide the magazine forward inserting the
nose guide pins into the magazine holes.
4. Turn the Quick Clear Knob clockwise until
fully tightened.
6
Guide
Pins
Mounting
Slot