Introduction And Machine Specifications - Clarke American Sanders B2 Manual Del Operador

revised 3/13

INTRODUCTION AND MACHINE SPECIFICATIONS

The B-2 is specifi cally designed for fi nishing fl oor edges, stairs, and other hard-to-reach surfaces. The handle location and low center of gravity
make the B-2 easy to operate.
The excellent cutting power comes from a powerful universal type motor. A motor that delivers maximum performance without slowing down or
overheating. Its exclusive two speed control when switched to hi-speed produces 3200 rpm for fast, rough sanding. At low speed, the B-2 operates
at 2800 rpm for fi ne, fi nish sanding. A non-marking disc guard protects the rubber pad, permitting the edger to work right up to the baseboard or wall.
1-Powerful Universal Motor
2-Comfortable Operating Handles
3-Aluminum Alloy Casting
4-Balanced Sanding Disc for perfectly matched job
5-Non-Marking Roller Guard
6-Non-Marking Swivel Type Casters
7-High Low Switch
*-Hardened Steel Alloy Pinon and Drive Gear
*-Powerful Vacuum Fan for effi cient dust pickup
SPECIFICATIONS
Model 07072A
Voltage / Frequency 110V-120V / 50-60Hz
Amperage 13.0
Motor 1450W (1HP)
Sound Level 91dB (A)
Vibration 14.3 m/s
Abrasive Size 178mm x 22 mm Dia. (7" x 7/8" Dia.)
Disc Rate High 3200 RPM
Disc Rate Low 2800 RPM
Gears Hardened steel alloy pinion and drive gear.
Bearings Sealed ball bearings, lifetime lubricated.
Dust Collector Powerful vacuum fan, full aluminum skirt
Power Cord 12m H07RN F3G 1.5mm
356 x 260 x 343mm (14 x 10½ x 13½)
Dimensions
Weight 14.5 kg (32 lbs.)
Shipping Weight 21 kg. (46 lbs.)
American Sanders Operator's Manual (EN) - B2
Clarke ®
2
3
4
2 rms
2
1
7
6
5
07073B
220V-240V / 50-60Hz
6.5
1450W (1HP)
91dB (A)
14.3 m/s 2 rms
178mm x 22 mm Dia. (7" x 7/8" Dia.)
3200 RPM
2800 RPM
Hardened steel alloy pinion and drive gear.
Sealed ball bearings, lifetime lubricated.
Powerful vacuum fan, full aluminum skirt
12m H07RN F3G 1.5mm 2
356 x 260 x 343mm (14 x 10½ x 13½)
14.5 kg (32 lbs.)
21 kg. (46 lbs.)
ENGLISH
EN
FORM NO. 79001C - 5 -