Subject To Change - Narex AS 12-3 Instrucciones De Uso

Switch (Fig.) B)
Mounting on the flashlight cover and its dismantling (Fig. C)
C1
Use of the coupling hook (Fig. D)
D1
Mounting on the batteries and their dismantling (Fig. E)

Subject to change

The switch of the flashlight allows setting of one of
the four functions after a repeated pressing of the
switch in the following order:
1st function – the switch turns the LED diodes on,
2nd unction – the switch activates the alert flash of
3rd function – the switch turns the bulb on,
4th function – the switch turns the bulb off.
The orange cover of the flashlight is convenient for
C2
use together with the third switch function; flashing
of the LED diodes has then an alerting character.
1. The "UP" indication on the flashlight cover should
2. The cover of the lamp is equipped with four
3. For dismantling, press the flashlight cover on one
4. If you do not use the flashlight, put the cover back
D2 1. Tilt the flashlight head forward. (Fig. D1)
2. Pull out the coupling hook. (Fig. D2)
3. Turn the hook as required in the horizontal direc-
4. Before the insertion put the hook back to the
Battery dismantling: Press both fasteners on the side
of the battery and pull.
Battery mounting: Put the base of the flashlight on
the guiding groove of the battery and pull.
the LED diodes,
be in the upwards direction, thus the cover copies
the shape of the flashlight. (Fig. C1)
clamping pins on the inner side through which
the cover is fixed in respective grooves on the
sides of the flashlight (Fig. C1)
side, and the other side jumps off the
grooves. (Fig. C1)
on. (Fig. C2)
tion to suspend the flashlight. (Fig. D2)
initial position. (Fig. D2)
English
9