Customer Support; Technical Details; Included In Delivery - Zipper Maschinen ZI-GPS70 Manual De Instrucciones

2 EN
USER MANUAL
Dear Customer!
This manual contains important information and
advice for the correct and safe use and mainte-
nance of the ZIPPER garden maintenance set ZI-
GPS70. The manual is part of the machine and
may not be stored separately. Read it profoundly
before first use of the machine and keep it for
later reference. When the machine is handed to
other persons always put the manual to the ma-
chine.
Please follow the security instructions!
Due to continuous development of our products
illustrations, pictures might differ slightly.
Attention!
Technical changes reserved!
Copyright
© 2010
This manual is protected by copyright law – all
rights reserved. Especially the reprinting as well
as the translation and depiction of pictures will be
prosecuted by law. Court of jurisdiction is WELS,
Austria.

Customer Support

Z.I.P.P.E.R MASCHINEN GmbH
Gewerbepark 8
A-4707 Schlüsslberg
Tel 0043 (0) 7248 61116 - 700
Fax 0043 (0) 7248 61116 – 720
info@zipper-maschinen.at
2.1 Components (Fig. A)
1 Engine
2 Extension pole
3 Hedge trimmer
4 Twig saw
5 Brush cutter
6 Trimmer
7 Scythe blade
8 Safety cover
9 Angle adjustment hedge trimmer
10 Belt
11 Pole with control panel
2.2

Technical Details

Engine type
Displacement
Engine power
Maximum engine speed
Idle speed
Starter
Ignition
Fuel capacity
Ratio fuel : oil
Weight
Trimmer: 2-thread head
Maximum cutting width
Thread length
Thread thickness
Leaf scythe: 3-tooth blade
Blade dimensions
Twig saw: Carlton sword
Length
Sword length
Hedge trimmer: 180° adjustable
Maximum cutting length
Technical changes reserved.
2.3

Included in delivery

Unpack the ZIPPER garden maintenance set ZI-
GPS70 and check the machine for any transport
damage and for completeness of delivery.
2-stroke engine
25,4 cm³
0,8 kW
10300 rpm
2800 rpm
Reverse starter
CDI
0,7 Litres
25 :1
5 / 7 kg
455 mm
2,5 m
Ø2,4 mm
Ø255xØ25,4x1,5
1500 mm
25,4 cm
400 mm
21