Device List - Audiolab S13.4 DCP Manual Del Usuario

8. DEVICE LIST

1. Device ID number
2. Device name
3. Output 1~4 channel volume
4. IN1~IN4 Input level, from top to bottom are
IN1~IN4
5. OUT1~OUT4 Output level, from top to bottom
are OUT1~OUT4
6. Device temperature
7. Device running status
Device taskbar, switch the device list, LINK interface and device interface, Device List displays all devices
LINK interface, all LINK devices take effect at the same time after adjusting the parameters, only can ad-
just the DSP parameters. The device interface can adjust the parameters of a single device. The font color
will be yellow when the device is warned, and the font color will be red when the device error occurs.
P. 16
AUDIOLAB S13.4 DSP -
English version
8. Device mute
9. Device boot / standby
10. Device lock, all parameters can not be ad-
justed after locking
11. LINK check, all the selected devices will be
updated at the same time when adjust the
parameters in the LINK interface , the initial
parameters of the LINK interface are based
on the first LINK device.