Changing Device Or Screen Orientation; Changing Device Orientation - Saltillo TouchChat Express-D Guía De Uso

Changing Device or Screen Orientation

You can change the orientation of your TouchChat Express as well as the orientation of the display.

Changing Device Orientation

If you want to change the orientation of the amplifier, holes were provided in the plastic shell for
arranging the amplifier in either a landscape or portrait layout. You will need a Phillips screwdriver.
First: Remove the Amplifier
Remove the shell and boot from the device, and then remove the boot from the shell. Remove the four
screws from the shell that are holding the amplifier in place.
Next: Open new mounting holes in the shell
Position the shell in the orientation you want.
For portrait: Use the holes For landscape: Use the
on one of the shorter sides holes on the longer side
Use the tip of the Phillips screwdriver to punch out the four holes circled in the appropriate illustration
above.
Use extra care when punching out the holes. Do NOT hold the shell in your hands or against your body. Place the shell
on a flat surface and hold the shell on a side as far away as possible from the holes you are going to punch. Do NOT place
your hand under the shell.
Then: Replace the Amplifier
Fasten the amplifier to the shell in the new position. Put the boot over the device, and then insert the
device/boot assembly into the shell.
TouchChat Express User's Guide 58