Operating Instructions and Parts Manual
Operation (Continued)
recoMMended uses For thIs coMPressor
Auto maintenance
u
Auto restoration
u
Fastening
u
Home maintenance
u
Inflation
u
Woodworking
u
tooL recoMMendatIon For thIs coMPressor
Continuous Use —
Inflation accessories
Airbrush
Air screwdrivers
Brad nailers and Staplers
Caulk guns
Engine cleaners
Finish nailers
Grease guns
Home spray guns
Impact wrench
Ratchets
Reciprocating saws
Roofing and Framing nailers
Intermittent Use (Short powerful bursts) —
Air chisels
Air drills
Automotive spray guns
Die grinders
Tools Not Recommended —
Cut-off tools
Dual action sanders
Highspeed sanders
Jitterbug sanders
Straight line sanders
end oF oPeratIon / storage
1. Turn unit OFF.
2. Unplug power cord from wall outlet to prevent damage when not in use.
3. Wearing safety glasses, deplete tank of air by pulling the ring on the safety valve. Use
other hand to deflect fast moving air from being directed toward your face.
4. Drain tank of condensation by opening drain valve on side of tank.
5. Air hose should be disconnected from compressor and hung open ends down to
allow any moisture to drain.
6. Compressor and hose should be stored in a cool, dry place.
Figure 15
Figure 16
Figure 17
Figure 18
Figure 19
www.chpower.com
WL675000
13