Cleaning And Maintenance - Bimar VT322 Folleto De Instrucciones

1) Insert the lower part of the body (7) in the base (8) (see the figure to the right), fasten the parts using the screws
provided "3" (12) and lock them in a normal way.
2) Unscrew the nuts: fan attachment (2) and rear grille (3) on the motor shaft if previously set.
3) Insert the rear grille (4) in the motor housing, so that the handle (13) appears at the top (as
figure) and position. It so that the pins fit in their corresponding holes and lock it with the
ring nut provided (3).
4) Insert the fan (10) on the motor shaft (5), so that the slot matches the spline. Lock using
the ring nut (2), turning it counter clockwise to tighten.
5) Couple the front grille (1) to the rear one (4) locking it with the closing hooks. For safety
reasons, you must make sure that it is attached by using the screws and nuts provided (11),
which are to be used in the holes in the edge of the grilles (the holes for the screw must be
in the lower part).
USE
Insert the plug of the fan in the power supply.
Ventilation: select the desired speed with the selector (9).
1 – Minimum speed 2 – Medium speed 3 – Maximum speed
Horizontal oscillation (right-left): this is selected with the button (6) located on the motor body. To stop the motion and keep
the ventilator still, press the button.
Vertical inclination (high-low): it is regulated by gripping the motor body and orienting it in the direction desired; you will
hear "click" that indicate the fan's various position.
To turn the fan off, press the "0" key and then remove the plug from the socket.
When not in use for long periods, the plug must always be removed from the socket.

CLEANING AND MAINTENANCE

Attention: before normal cleaning, remove the plug from the socket.
 Clean the body with soft, slightly damp, cloth; do not use abrasive or corrosive products.
 Do not immerse any part of the fan in water or other liquid: if this should happen, do not put your hand in the liquid, but
first remove the plug from the socket. Carefully dry the appliance and make sure that all the electrical parts are dry: in the
case of doubt, ask for professionally qualified help.
 It is essential that the motor's air holes be kept from dust and lint.
 If the fan will not be used for long periods, it must be protected from dust and humidity; we recommend storing it in its
original packaging.
 Should you decide not to use the appliance any more, we recommend making it inoperative by cutting the power cord
(after making sure you have disconnected the plug from the socket) and make dangerous parts harmless if children are
allowed to play with them (such as the blade).
IMPORTANT INFORMATION FOR CORRECT DISPOSAL OF THE PRODUCT IN ACCORDANCE WITH EC DIRECTIVE
2011/65/EC.
At the end of its working life, the product must not be disposed of as urban waste. It must be taken to a special local
authority differentiated waste collection centre or to a dealer providing this service. Disposing of a household appliance
separately avoids possible negative consequences for the environment and health deriving from inappropriate disposal
and enables the constituent materials to be recovered to obtain significant savings in energy and resources. As a reminder
of the need to dispose of household appliances separately, the product is marked with a crossed-out wheeled dustbin.
8/20