EN
Press button to start treatment.
Press or button to adjust the output intensity. The
stimulator will start to work. The maximum output intensity
level is 25.
CAUTION:
• If the electrodes are not placed firmly on skin, or the
device has not connected with the electrodes, and the
output intensity level is over 5, the intensity will stop
automatically.
• If the stimulation levels are uncomfortable or become
uncomfortable, reduce the stimulation intensity to a
comfortable level and contact your medical practitioner
if problems persist.
• If your pain does not improve and you become sore from
over-use, refrain from treating those areas for two (2)
days. If this issue reoccurs, reduce the treatment time
and intensity settings for future treatment.
• If you feel pain, dizziness, discomfort or nausea, call your
physician or medical practitioner.
• Caution should be used when working with maximum
intensities, (i.e., always at the limit of what you can
support.) Do not exceed your comfort level.
STEP 7
Turn off the device
Press the button and hold for two (2) seconds to turn
off the device. If there is no operation in the panel for five
(5) minutes in the waiting state, the device will turn off
100275_MYO-TENS_USER MANUAL_REV.00.indd 38
automatically.
STEP 8
Storing the electrode pads and lead wire
• Turn the device off and remove the lead wire from the unit.
• Remove the pads from your body and pull out lead wire
from the pads.
• Place the pads on the plastic film and store in the sealed
package.
• Wrap the cables and store them in their plastic bag.
Storing the unit
• Store the device, the electrodes and cables in the bag
provided. Store in a dry place, -10°C~55°C; 10%~90%
relative humidity. Failing to do so may affect the
performance of the stimulator.
• Do not store in places that can be easily reached by
children.
• Store the device in the dry, clean place. It is forbidden to
leave the product exposed to any chemical solvent, lint,
dust, direct sunshine or high temperature.
• When not in use for a long period, remove the batteries
before storage to avoid liquid discharge from batteries.
38
08/08/2019 15:15:02