Epson L310 Guia De Instalacion página 3

L310
Start Here
1
Unpack
Note: The included ink bottles must be used for product setup and are not for resale.
2
Fill ink tanks
Note: This product requires careful handling of ink. Wear plastic gloves and place a sheet
of paper under the ink tank unit when you fill or refill the ink tanks, as ink may splatter. If
ink spills, wipe it off immediately to avoid permanent stains. If ink gets on your clothes or
belongings, it may not come off.
Turn on the printer and wait until
the power light stops flashing.
3
Load paper
Caution: Do not open the ink bottles until you are ready to fill the ink tanks. The ink bottles are vacuum
packed to maintain reliability.
Warning: Keep ink bottles out of the reach of children and do not drink the ink.
Caution: Replace bottle cap tightly, or
ink may leak.
/
Press the button for 3 seconds until the
light starts flashing. Ink charging takes approximately
20 minutes. Ink charging is complete when the
light stops flashing.
Read these instructions before using your product.
Make sure to use the ink bottles that came
with your product and use all of the ink.
Fill each tank with the correct ink color.
power
power