Astralpool LumiPlus WiFi Acces Point Manual De Instalación Y Mantenimiento página 3

Sistema de control wifi proyectores lumiplus rgb
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 8
Selecting the colour
The COLOR key enables you to select 1 colour of the 12 available in the system. Press once to change colour. Once you
reach the last colour, press once to go back to the first colour.
Selecting the sequence
The SEQUENCE key enables you to select 1 sequence of the 8 available in the system. Press once to change sequence.
Once you reach the last sequence press once to return to the first sequence. All the sequences are cyclic, that is, on rea-
ching the last colour they start again.
Selecting the sequence speed
The SPEED key enables you to select 1 sequence speed of the 8 available in the system. Press once to change the speed.
Once you reach the last speed press once to return to the first speed.
LED indicator: By observing the green led of the Modulator, you can determine the operation mode of the spotlight:
• Led off: No supply power
• Flashes every 2 sec: Spotlights with leds off
• Led on permanently: Spotlight in FIXED COLOUR or SEQUENCE mode
• Quickly flashing: LINK function
• Flashes for 2 sec: Order received from remote control
Synchronizing Modulators
Two or more modulators can be synchronized if they are linked together by the Lumiplus Bus, the same bus where the
external radio Receiver is connected. Modulators sharing the same bus operate in a synchronized mode:
• If a pushbutton of any of the modulators is pressed, it will affect the other modulators in exactly the same way.
• A remote control will equally affect all the modulators which share the bus with the radio receiver.
The result is that all the projectors of the system controlled either from the remote control or the keypad of one of the
modulators, will operate in a completely synchronized manner.
Connection is performed following the same steps as for the antenna, with a non-polarized twin cable connected to termi-
nals 31 and 32 of the terminal strip of the modulator.
The system can synchronize up to 10 modulators, and a maximum of 3 antennas can be mounted in one installation in
order to guarantee maximum coverage.
3. LUMIPLUS LED APP
The LumiPlusLED is an application that allows to control the AstralPool LED lights of your pool from
a Smartphone or a tablet, iOS (iPhone/iPAD) and Android devices.
The application allows the interaction with the LumiPlus Modulator using the WiFi technology by
connecting the Smartphone or tablet to the LumiPlus Wifi Access Point.
Projector
Power Supply
3

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

5913159132

Tabla de contenido