Altrad BGP POKERS Manual Del Operador página 10

GB Service and Maintenance (BGP 27-107)
Maintenance
The Belle Group 'BGP' Pneumatic Vibrating Pokers are designed to give many years of trouble free operation. It is recommended that
use of spurious parts may void your warranty.
Periodic Maintenance.
Dismantling & Re-assembly Instructions (Refer to the replacement parts list supplied with this manual).
1) Replacement of Vane and Rotor
to drop or damage the rotor. The parts should be cleaned and examined. If the inside of the nose piece or rotor show signs of
outs face away from the milled slot in the rotor.
Re-assembly is the opposite of the above but the following should be observed.
2) Removal of Rear Body
Re-assembly of rear body, rear closure plate and hoses.
3) Wear Criterior.
The optimum condition of the vibrator turbine assembly to produce maximum speed and therefore power is determined by the total
greatly impairs the performance of the poker.
10