Mach Power HC-FTPOY2 Guía De Uso página 7

ENG
Setup the LED display brightness
The first itemis to setup the display brightness. Long- press
the button to select a brightness level ranging from 1 to 3. The
greater the value, the greater brightness of the display.
Setup the Sp02 Alarm Limits
The second itemis to setup the SpO2 alarm limits. For
example: When Spo2 High limit is set to 96, an alarm will be
issued when the Spo2 value is higher than 96, and when Spo2
low limit is set to 94, an alarm will be issued when the spo2 value
is lower than 94.
Setup the PR Alarm Limits
The third item is to setup the PR alarm limits. For example: When
PR High limit is set to 130, an alarm will be issued when the PR
value is higher than 130, and when PR low limit is set to 50, an
alarm will be issued when the PR value is lower than 50.