Maintenance; Operation - Wattio BAT Manual Del Usuario

Once the BAT has been installed, it is necessary to register in following the Wizard on the web
platform.
NOTICE: it is highly recommended not to close the
electrical panel until the registration has been
successfully done.
In case of necessary, due to an installation incidence
or for any other issue, the initial configuration can
be recovered resetting the BAT using a clip and
pressing the button inside.

Maintenance

Operation

The consumption monitored by the BAT is shown real time in the three apps as well as the
accumulated consumption in W, euros and CO2. The detailed historical information is also
illustrated via statistics.
The user will be noticed about the low battery
state in the web app. To remove the battery
cover, it must be pressed as shown.
NOTICE: To change the batteries, the BAT
must be disconnected from the power grid
for security reasons.
Lights
1.98 kW
Kitchen
O,34 kW