Important - Craftsman 247.889330 Manual Del Usuario

For Parts Call 606-678-9623 or 606-561-4983 For Parts Call 606-678-9623 or 606-561-4983
inSTALLinG The GeAR ShifT LeveR
1. Remove the 5/16-18 screw and the lock nut that hold the shift
lever to the shift lever plate, Figure 4.
2. Remove the remaining screw and nut from the lower shift lever
plate, Figure 4.
3. Position the upper shift lever into a vertical position aligning the
holes in the lever to the holes in the shift plate, Figure 5.
4. Secure the lever to the plate using the two screws and two nuts
removed earlier, Figure 5.
finAL AdjuSTmenTS
Rear Tire Pressure
WARninG
Never exceed the maximum inflation pressure shown on the sidewall
of tire.
The recommended operating rear tire pressure is approximately 20
psi for the rear tires. Check the tire pressure periodically and maintain
equal pressure in both rear tires at all times.
IMPORTANT: Refer to the tire sidewall for exact tire manufacturer's
recommended or maximum psi. Do not overinflate. Uneven tire pres-
sure could cause the cutting deck to mow unevenly.
ASSEMBLY
www.mymowerparts.com www.mymowerparts.com

Figure 4
Figure 5