Technical Characteristics - Promaker PRO-ES750 Manual Del Usuario

will then be recycled or dismantled
in order to reduce the impact on the
environment. Electric and electronic
equipment can be hazardous for
the environment and for human
health since they contain hazardous
substances.
5. Tool Specifications

TECHNICAL CHARACTERISTICS

Voltage /
Frequency
Power
Speed
Cord
Weight
Grinding Disc
Diameter
The declared vibration total value
has been measured in accordance
with a standard test method and
may be used for comparing one tool
with another;
The declared vibration total value
may also be used in a preliminary
assessment of exposure.
Warning!: the vibration emission
during actual use of the power tool
can differ from the declared total
value depending on the ways in
which the tool is used".
Warning!: avoid vibration risk
Suggestions:
1) wear glove during operation;
120V /
60Hz
750W
11000rpm
2m
4.4Lbs
4½" (115mm)
2) limit operating time and shorten
trigger time.
6. Operation / Assembly / Drawing
Overview
1. Switch
2 .Drive shaft
3. Side handle
4. Gear box
5. Protective cover (grinding)
6. Lock button
7. Spanner
8. External flange with thread
9. Internal flange
10. Protective cover (Cutting)
Mounting the Side Handle
The side handle can be fitted to
the left, right of the unit. Select
the position which gives the most
comfortable and safe use.
CAUTION:
Always be sure that the side grip is
installed securely before operation.
During operation, keep one hand on
the rear handle and the other on the
side handle.
Installing or moving protective cover
9