Cleaning And Care - Beper VE.560 Manual De Instrucciones

Enfriador usb portátil
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 19
EN
Portable USB air cooler Use Instructions
• Do not put scented oils and / or essences into the tank.
• Do not leave the water in the tank if you do not intend to use the product for some time, to avoid the formation
of unpleasant odors and / or molds.
USE:
After placing the product on a flat and stable surface, open the water tank door and fill it using a measuring cup
or jar. (It is recommended not to let the water overflow).
Connect the smallest part of the USB cable to the appropriate plug located at the bottom of the rear grille, and
the larger part of the USB cable to a computer or other source of charge.
It is also possible to connect the widest part of the USB cable to an adapter to connect it then to the power outlet.
Press the switch button and set the desired speed by pressing the appropriate button. It is possible to choose
between three types of speed (low, medium, high), the indicator light next to the button indicates the selected
speed.
It is also possible to choose whether to operate the product with light and optionally choose from 7 different co-
lours using the appropriate button. You can choose a fixed colour from those proposed or the colour cycle mode
by pressing the colour selection button 8 times.
When finished, press the switch button to turn off the product.

CLEANING AND CARE:

Make sure the product is turned off and unplugged from the power cord before performing any cleaning and / or
maintenance operation.
Clean the water tank and the outside of the product with a soft, slightly damp cloth.
To maintain product performance over time, it is recommended to replace the evaporative panel every 6 months.
To replace the evaporative panel proceed as follows:
Gently press the grid release tab placed on the bottom of the front grille and pull the grille towards yourself.
Remove the used evaporative panel and replace it with the new one.
Reposition the front grille, being careful to hook it correctly.
TECHNICAL DATA:
INPUT: DC 5V - USB
For any improvement reasons, Beper reserves the right to modify or improve the product without any
notice.
9

Publicidad

Tabla de contenido
loading

Tabla de contenido