Troubleshooting; Replacement Parts - Troy-Bilt Flex Manual Del Usuario

Troubleshooting

Problem
Excessive Vibration
Unit does not discharge
Rate of discharge slows considerably
or composition of discharged
material changes
Weak Chipping
Unit does not function

Replacement Parts

Component
Phone (800) 828-5500 to order replacement parts or a complete Parts Manual (have your full model number and serial number ready). Parts Manual downloads are
also available free of charge at www.troybilt.com.
Cause
1. Loose parts or damaged impeller.
1. Discharge area clogged.
2. Foreign object lodged in impeller.
1. Chipper blade dull.
1. Chipper blade dull.
2. Worn belt.
1. Broken belt.
1. See authorized service dealer.
1. Stop engine, make certain the chipper shredder has
come to a complete stop, and disconnect the FLEX™
Power Base from the attachment. Clean flail screen and
inside of discharge opening. See Maintenance & Service
section under Cleaning the Reduction Chamber.
2. Stop engine, make certain the chipper shredder has
come to a complete stop, and disconnect the FLEX™
Power Base from the attachment. Remove lodged
object.
1. Replace chipper blade or see your authorized service
dealer.
1. Replace chipper blade or see your authorized service
dealer.
2. See authorized service dealer to have your belt
replaced.
1. See authorized service dealer to have your belt
replaced.
Part Number
942-0544B
742-05239
753-08457
Remedy
Description
Chipper Blade
Shredder Blade
Clutch Bumpers Kit (6)
6
7
11