Alternate Rigging - Chauvet DJ DMX-4 Guía De Referencia Rápida

EN
Alternate
Rigging
Mounting
Diagram
(Alternate
Configuration)
If you are using this product with truss or a lighting stand, there is an
alternate rigging configuration available. This option is ideal for hanging the
product without using a mounting clamp.
1. Unplug the product from power.
2. On the back of the product, locate the six Phillips-head screws.
3. Use a Phillips-head screwdriver to remove these screws.
4. The mounting bracket will now come off. Be careful not to damage
the internal components of the dimmer, as they are exposed during
this step!
5. Flip the mounting bracket (back panel) around.
6. Reattach the panel by securely reinstalling the six Phillips-head
screws
Back Panel

Alternate Rigging

Configuration
6
DMX-4 QRG
Remove these
six screws