POWERCOLOR RED DEVIL Guía De Instalación Rápida página 4

Quick Installation Guide
Package Contents
1. Graphics Card
2. User's Manual
System Requirements
1. Expansion Slot: Motherboard with one or more
PCI Express x16 slot.
2. Display: Monitor or other display device with
compatible connectivity to the output interface of
your graphics card.
3. Power requirement: Power Consumption differs
by model.
(For additional support details, please refer to:
www.powercolor.com/ to calculate your minimum
system power requirement.)
4. Operation System: Linux©/Windows 10
®
(For additional support details, please refer to:
https://www.amd.com/en/support)
Hardware Installation
1 Turn off computer, switch off the PSU, and
disconnect the power cord.
2
Open the case.
3 Remove any existing graphics card (if applicable)
or PCIE slot covers.
4 Insert the Graphics Card into the PCIE slot.
Make sure seating is secured with the PCIE
5
locking mechanism in place.
6
Secure graphics card to the PCIE bracket with
thumbscrew.
7 Plug in the required external PCIE power
connectors (if applicable) from the appropriate
PC Power Supply Unit.
8
Close the case.
9 Connect the display cable into the corresponding
GPU display output port.
10
Power on System, booting to OS. (Removing all
drivers for your previous card and performing a
clean install of the new drivers is recommended.)
Driver Installation
1. Please download the driver.
2. Install the driver based on your product.
3. Execute the driver and follow the instruction.
Driver Installation Link
Driver for PowerColor
https://www.powercolor.com/downloads
Driver and Support for AMD
https://www.amd.com/en/support
A Additional Support (Optional)
※ If the graphics card has multiple BIOS switches,
you can switch to your personal preference.
1. Confirm that the computer is powered off and
switch the BIOS you want.
2. Reboot your PC.
(For additional support details, please refer to:
https://www.powercolor.com/ for specific model
support)
B AMD Radeon Setting Software Installation
To take full advantage of the features and
capabilities of your Radeon Graphics products,
installing the most up-to-date Radeon Software is
recommended.
1. Radeon WattMan:
Take your gameplay to the next level by fine-
tuning your GPU voltage, engine clock, memory
clock, fan speed, and temperature.
2. Radeon™ ReLive:
Capture, stream and share your greatest
moments.
(For more support, visit: https://www.amd.com/
en/support/driverhelp)
※Requires downloading the "AMD Settings"
software included when installing the driver
AMD/Radeon driver.
4
Addressable RGB (ARGB) LED Cable Connection
• Connect the ARGB LED cable to the ARGB LED Headers between
PowerColor graphics card and your motherboard, the PowerColor LED light
can be controlled by PowerColor Devil Zone software or synchronized via
motherboard software.
* The factory default setting is controlled by PowerColor Devil Zone, if you want to sync with
motherboard software, please disable GPU control on Devil Zone.
• You can also connect another ARGB device to the male connector for syncing
with motherboard ARGB control.
Female connector connect to motherboard header
1
G
+5V D
* The ARGB LED Header supports ARGB LED cable, with a maximum power rating of 3A (5V)
and total length within 2 meters.
Notices:
- Do not install an RGB LED cable in the ARGB LED Header; otherwise the hardware
and cable may be damaged.
- Only use the ARGB LED cable to connect on both motherboard and PowerColor
graphics card.
- PowerColor graphics card is compatible with motherboards which have headers for
ARGB LED cables. The headers should have the 3-pin configuration. For further
information concerning compatibility, refer to the manual of your mainboard, or visit the
manufacturer's website.
- To avoid damaging any hardware, please make sure the system is turned off and the
power cord is unplugged before connecting or removing the ARGB LED cable.
ARGB Male Connector
Female connector connect to
PowerColor graphics card header
5