Enter Hardness - Aquanex AQU36 Manual Del Propietário

sTeP 7 ENTER HARDNESS
S U M O T U W E T H F R S A D A Y S
Time & Day
T i n , e & D a y
Regen Time & Day
Regen Tin,e & Day
Salt
Backwash Tin,e
Capacity
Capacity
Hardness
Hardness
Initial programming is now complete. The control will return to normal operation
mode if a button is not pushed for 30 seconds.
13 • 8/08 AQU36WS
A. Default hardness setting is 25 grains (ppm for metric).
B. To change hardness, press SET to make the set-
ting flash. Use the UP and DOWN buttons to
advance to the desired hardness.
C. Press SET to accept the entered hardness value.
D. The control will return you to the normal operation
mode.