Initial Connection - Sartorius YCC01-USBM2 Instrucciones De Instalación

Initial Connection

Loading the Software Drivers
Download the VCP driver online: http://www.ftdichip.
com/FTDrivers.htm
Once you have downloaded the software, set up the
virtual port on the computer.
Installation Guides
The installation guides for the drivers can be found here:
http://www.ftdichip.com/Documents/InstallGuides.htm
Installing the Drivers for the USB Interface
Installing the Software Drivers for the USB Interface
1. Start the installation process for the downloaded program.
2. Each version of Windows
procedures for loading the drivers; however all versions
have a wizard.
®
Windows usually adds the virtual interface in the
position following your highest-numbered COM port.
Insert paragraph spacing as per source. For example,
on a PC with 4 COM ports, the virtual interface is added
as COM5 (shown in the Device Manager).
6
®
may have slightly different