Lacrosse WT485 Manual De Instrucciones página 4

TO SET 12HR OR 24 HR TIME FORMAT
1. Then press SET again, the clock display shows 24Hr and flashes.
2. Press + or - to select 12Hr or 24Hr. When 12Hr time format is selected, the PM icon will appear
on the clock display to indicate the afternoon time.
TO SET THE SNOOZE DURATION
1. Press SET again, the clock display shows Zz and "05" flashes.
2. Press + or - to set your desired snooze duration from 5 to 60 minutes.
TO SET TIME ZONE
1. Press SET again, the clock display shows "00" and flashes.
2. Press +/- to select time zone
"00" = GMT +1 hour (e.g. Germany)
"01" = GMT +2 hours (e.g. Finland)
"02" = GMT 00 hour (e.g. U.K.)
Press SET again (or if no key is pressed within 5 seconds) to return to normal clock display mode in
around 30 seconds.
TO SET THE DAILY ALARM
1. Press ALM button once, the clock display shows "6:00" and flashes.
2. Press + or - to set your desired alarm time. Press and hold + or - will accelerate setting in faster
speed.
3. Press ALM again to select Wake-by-Buzzer (
appears).
4. When both
TO TURN ON OR OFF ALARM
1. Press ALM button once to review the currently set alarm time
2. Press the ALM button again to turn on or turn off the alarm. When the alarm is turned on, the
related alarm icon appears. When no alarm icon is showing, the related alarm icon is off and the
alarm function is turned off
TO STOP AND RESET THE ALARM TO COME ON THE NEXT DAY
When the alarm sounds, press the ALM button to stop the alarm sound and automatically reset it to
come on the following day.
and icons disappear, the alarm is turned off.
icon appears) or Wake-By-Radio ( icon
English Page 4 of 9