Maintenance - Polygroup 36 POOL LADDER Manual Del Usuario

6. Secure the handrails: insert a Machine Screw 7 (with Washer 8) from the inside of the ladder, and fasten with a Lock Washer 9 and lastly a
Cap Nut 10 . Repeat with another handrail. The ladder should now look like an inverted "V" from the side.
IMPORTANT: make sure that all the screws are firmly tightened. THIS PREVENTS THE HANDRAILS FROM SEPARATING FROM THE LEGS.
LADDER FAILURE WILL RESULT IF SCREWS ARE NOT PROPERLY INSTALLED!
7. Install the Ladder Warning Brackets
with a Lock Washer 9 and lastly a Cap Nut
1. Mud may cause slipping. Keep the ladder treads free of mud.
2. Retighten the ladder hardware regularly. LOOSE HARDWARE WILL CAUSE LADDER FAILURE.
Should you encounter any problems, contact Customer Service at (888) 919-0070 from 8AM to 5PM MST, Monday-Friday.
11 : with the text facing outwards, insert a Machine Screw 7 (with Washer 8) from the inside of the ladder, and fasten
10 .
10
FIG. 5

MAINTENANCE

Extended operating days and hours during peak season requirements.
OWNER'S MANUAL
3
7
8
9
11
Make sure to place the Washer 8 under the Screw 7,
and the Lock Washer 9 under the Cap Nut
3
10
11
9
8
7
10 .
9