Alto TRUESONIC TS112A Guia De Inicio Rapido página 8

SPECIFICATIONS
Output Power:
Crossover:
Max SPL @ 1m:
Frequency Response:
Input Level:
Low Frequency:
High Frequency:
Horn Coverage:
Connectors:
Cabinet:
External Control:
Power supply:
Dimensions (H x W x D):
Weight (speaker only):
THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TO THE
FOLLOWING TWO CONDITIONS: (1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND (2)
THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT MAY
CAUSE UNDESIRED OPERATION.
Inrush current at initial switch-on: 6.02 A
Inrush current after power supply interruption: 4.16 A
400 W Continuous RMS (335 W LF Class D + 65 W HF Class AB)
800 W Peak (670 W LF Class D + 130 W HF Class AB)
2 kHz
122 dB Continuous, 125 dB Peak
52 Hz – 18 kHz (@ -10 dB)
Line 0 dBu
12" (305 mm) woofer, 2" (51 mm) voice coil
1" (25 mm) neodymium driver
80/100° H x 60° V nominal
Input: 1/4" TRS or XLR
Link: XLR
Polypropylene, trapezoidal
Volume, power on/off with LED, clip limiter with LED, ground lift
100-120 V or 200-240 V, 50/60 Hz
26" x 15.6" x 15.1" (660 mm x 396 mm x 384 mm)
42.8 lbs (19.4 kg)
www.altoprofessional.com
MANUAL VERSION 1.4