Resumen de contenidos para Ameriwood HOME Vaughn 5994196COM
Página 1
ViVit: www.ameriwoodhome.com Easy Tough Assembly Meter WARNING Follow Ameriwood Home - Unit can over causing severe injury or death. - Anchor unit to stud in wall (if instructed to). - Do Not allow children to climb on unit. Tube - Put heavy items on lower shelves or drawers.
Página 2
CoVtact UV! Do NOT return this product! Contact our friendly customer service team first for help AVVembly TipV Call VV! 1-800-489-3351 Monday-Friday 9am - 5pm CST Tube ViVit ameriwoodhome.com HelpfVl HiVtV PEOPLE NEEDED FOR ASSEMBLY: 5‐2 ESTIMATED ASSEMBLY TIME: HOUR - Open your item in the area you plan to keep it to avoid excessive heavy lifting.
Página 3
Before YoV Start Read through each step carefully and follow the proper order Separate and count all your parts and hardware Give yourself enough room for the assembly process Have the following tools: Flat Head Screwdriver, #2 Phillips Head Screwdriver and Hammer Caution: If using a power drill or power screwdriver for screwing, please be aware to slow down and stop when screw is tight.
Página 4
Board IdeVt f cat oV Not actual size T5994196010 T5994196020 BOTTOM PANEL TOP PANEL T5994196030 T5994196040 SIDE LEFT PANEL SIDE RIGHT PANEL T5994196050 T5994196060 BACK PANEL STRETCHER PANEL ameriwoodhome.com...
Página 5
Board IdeVt f cat oV Not actual size T5994196070 T5994196080 UPPER STRETCHER WOOD LEG PANEL T5994196090 T5994196100 DRAWER BOX BACK DRAWER BOX RIGHT T5994196120 T5994196110 DRAWER SUPPORT DRAWER BOX LEFT T5994196130 T5994196140 DRAWER BOTTOM UPPER DRAWER LOUVER FRONT T5994196150 LOWER DRAWER FRONT ameriwoodhome.com...
Página 6
Part LiVt Actual Size TTA0003 Cam Lock TTA0001 TTA0005 TTA0014 15-11.5 Cam Bolt CBS 3.5 x 12 (RB) PHM 4 X 20 (RB) TTA0046 TTA0013 SCREW JCBC TTA0011 TTA0047 SCREW PHCB M6 X 50 (BLK) CBS (BLK) M4 X 38 SPRING WASHER M6 (BLK) 4 X 12 MM (RB) TTA0053 (BLK)
Página 7
Step 1 TTA0003 TTA0005 TTA0016 TTA0001 TTA0048 Cam Lock CBS 3.5 x 12 DOWEL 6 X 30 Cam Bolt Drawer Slide Q-Fit 15-11.5 (RB) 350 BLK Insert two cam lock, five screw cam bolt, and four dowel into the panel as shown. Attach drawer slide to the side panel as shown.
Página 8
Step 2 TTA0005 TTA0003 TTA0048 TTA0016 TTA0001 CBS 3.5 x 12 Cam Lock Drawer Slide Q-Fit DOWEL 6 X 30 Cam Bolt (RB) 15-11.5 350 BLK Insert two cam lock, five screw cam bolt, and four dowel into the panel as shown. Attach drawer slide to the side panel as shown.
Página 9
Step 3 Quick Assembly Proper orientation of CAM LOCK TTA0016 TTA0003 DOWEL 6 X 30 Cam Lock 15-11.5 Insert one cam lock, and six dowel into the panel as shown. *raw edges are shaded ameriwoodhome.com...
Página 10
Step 4 Quick Assembly TTA0003 Proper orientation of CAM LOCK TTA0016 Cam Lock DOWEL 6 X 30 15-11.5 Insert two cam lock, and four dowel into the panel as shown. x5 Set *raw edges are shaded ameriwoodhome.com...
Página 11
Step 5 Note: Hole facing Up Attach five stretcher (F) and upper stretcher (G) to the components from step 1 as shown. *raw edges are shaded ameriwoodhome.com...
Página 12
Step 6 Attach the side right panel (D) components from step 2 to the components from step 5 as shown. *raw edges are shaded ameriwoodhome.com...
Página 13
Step 7 TTA0046 TTA0053 TTA0047 SCREW JCBC FLAT WASHER SPRING WASHER M6 M6 X 50 (BLK) 6 X 20 X 1 (BLK) (BLK) Attach wood leg (H) to the side of base bottom (A) as shown. *raw edges are shaded ameriwoodhome.com...
Página 14
Step 8 TTA0046 TTA0053 TTA0047 SCREW JCBC FLAT WASHER SPRING WASHER M6 M6 X 50 (BLK) 6 X 20 X 1 (BLK) (BLK) Attach wood leg (H) to the side of base bottom (A) as shown. *raw edges are shaded ameriwoodhome.com...
Página 15
Step 9 TTA0011 CBS (BLK) M4 X 38 Attach the components from step 8 to the components from step 6 as shown. *raw edges are shaded ameriwoodhome.com...
Página 16
Step 10 x1 Set TTA0026 TTA0001 AMERIWOOD ANTI-TIPPING Cam Bolt Insert five screw cam bolt, and anti-tipping into the panel as shown. ameriwoodhome.com...
Página 17
Step 11 Attach the components from step 10 to the components from step 9 as shown. *raw edges are shaded ameriwoodhome.com...
Página 18
Step 12 IMPORTANT! THE BACK PANEL IS A STRUCTURAL PART OF THIS UNIT AND MUST BE INSTALLED PROPERLY. TTA0018 NAIL Attached the back panel as shown nailing straight into the raw edges. Assure that the unit is square. Distance from corner to corner must be equal as shown. Note: Flip the cheVt over from the previoVV Vtep before attaching the back panel.
Página 19
Step 13 TTA0030 DRAWER BRACKET x5 Set Insert the drawer bracket to the five set of drawer side right (K). *raw edges are shaded ameriwoodhome.com...
Página 20
Step 14 TTA0030 DRAWER BRACKET Insert the drawer bracket to the five set of drawer side right (J). x5 Set *raw edges are shaded ameriwoodhome.com...
Página 21
Step 15 TTA0016 TTA0001 DOWEL 6 X 30 Cam Bolt Insert the one screw cam bolt, and four wood dowels to the five set of drawer back (I). x5 Set *raw edges are shaded ameriwoodhome.com...
Página 22
Step 16 TTA0011 CBS M4 x 38 Attach the five sets of drawer back (I) to the five set of drawer side right (J) as shown. x5 Set *raw edges are shaded ameriwoodhome.com...
Página 23
Step 17 TTA0011 CBS M4 x 38 Attach the drawer side left (K) to the five set of the components from step 16 as shown. x5 Set *raw edges are shaded ameriwoodhome.com...
Página 24
Step 18 TTA0004 Cam Lock TTA0016 12-9.5 Insert two cam lock, and two wood dowels to the five set of drawer support (L). x5 Set *raw edges are shaded ameriwoodhome.com...
Página 25
Step 19 Attach the drawer support (L) to the five sets of the components from step (17) as shown. x5 Set *raw edges are shaded ameriwoodhome.com...
Página 26
Step 20 Insert drawer bottom (M) to the five sets of components from step 19 as shown. x5 Set *raw edges are shaded ameriwoodhome.com...
Página 27
Step 21 x1 Set TTA0001 Cam Bolt i)Insert one screw cam bolt to the Upper-drawer front (N) as shown. ii)Insert one screw cam bolt to the Lower-drawer front (O) as shown. x4 Set *raw edges are shaded ameriwoodhome.com...
Página 28
Step 22 TTA0013 PHCB 4 X 12 Attach upper drawer front (N) with screw PHCB to the components from step 20 as shown. x1 Set *raw edges are shaded ameriwoodhome.com...
Página 29
Step 23 TTA0014 TTA0050 PH M4 X 20 VAUGHN KNOB x1 Set Attach two Voughn Knob with panhead zink to the upper drawer front (N) as shown. *raw edges are shaded ameriwoodhome.com...
Página 30
Step 24 TTA0013 PHCB 4 X 12 Attach lower drawer front (O) with screw PHCB to the components from step 20 as shown. x4 Set *raw edges are shaded ameriwoodhome.com...
Página 31
Step 25 TTA0014 PH M4 X 20 TTA0050 VAUGHN KNOB x4 Set Attach two Voughn Knob with panhead zink to the four sets of lower drawer front (O) as shown. *raw edges are shaded ameriwoodhome.com...
Página 32
Step 26 x5 SETS TTA0048 DRAWER SLIDE TTA0005 350 BLK CBS 3.5 x 12 x5 Set Attach the drawer slide to the bottom of components from step 22 and 24 as shown. *raw edges are shaded ameriwoodhome.com...
Página 33
5554555COM VaVVhV 5 Vrawer VreVVer Step 27 For Masonry, Concrete, or other wall materials: Consult your local hardware store for appropriate anchors to securely attach the safety bracket. IMPORTANT: THIS UNIT MUST BE SECURE TO THE WALL TO HELP PREVENT TIPOVER. FOLLOW THESE INSTRUCTIONS TO INSTALL THE ANTI-TIPPING SAFETY BRACKET PROVIDED WITH THIS PRODUCT.
Página 34
Step 28 Notice, the drawer bracket holes are slotted. Drawer fronts can be adjusted by loosening screws, making needed adjustments and retightening screws. *raw edges are shaded ameriwoodhome.com...
Página 35
Maximum Loads This unit has been designed to support the maximum loads shown. Exceeding these load limits could cause sagging, instability, product collapse, and/or serious injury. 50 lbs. 23 kgs 36 lbs. 16 kgs WarViVV: RiVk of iVjVry to perVoVV ‐ do Vot place a televiVioV oV thiV fVrVitVre. ThiV fVrVitVre iV Vot approved for VVe with a televiVioV.
Página 36
ViVit yoVr local retailer'V webVite, rate yoVr pVrchaVed prodVct aVd leave VV Vome feedback! We woVld like to exteVd a biV "ThaVk YoV" to all of oVr cVVtomerV for takiVV the to aVVemble thiV Ameriwood Home prodVct, aVd to Vive VV yoVr valVable feedback. ameriwoodhome.com...
Página 37
Español CVbierta VelaVtera Este libro de instrucciones información IMPORTANTE de seguridad. Por favor lea y manténgalo para referencia en el futuro. No ReVreVe eVte prodVcto! Comuniquese con nuestro amistoso equipo de servicio al cliente para obtener ayuda. Llamenos al: 1-800-489-3351 Lunes -Viernes 9am -5pm CST ViVitar: www.ameriwoodhome.com PRECAUCION...
Página 38
Español PáViVa 5 Inserte una cerradura de leva y seis clavijas en el panel como se muestra. PáViVa 50 Inserte dos cerraduras de leva y cuatro clavijas en el panel como se muestra. PáViVa 55 Sujete cinco camillas (F) y camilla superior (G) a los componentes del paso 1 como se muestra. PáViVa 52 Sujete la pata de madera (D) al lado del fondo de la base como se muestra.
Página 39
Español PáViVa 25 Fije el soporte del cajón (L) a los cinco conjuntos de los componentes de la etapa (17) como se mues- tra. PáViVa 25 Inserte el fondo del cajón (M) en los cinco conjuntos de componentes del paso 19, como se muestra.
Página 40
Visite el web de su enda local, su comprado y denos sus comentarios! Nos gustaría enviar un gran "Agradecimiento" a todos nuestros clientes por tomarse el ensamblar este producto de Ameriwood Home, y por darnos sus valiosos comentarios. Gracias ameriwoodhome.com...
Página 41
Français CoVvertVre AvaVt CE LIVRET D'INSTRUCTION CONTIENT DES INFORMATIONS IMPORTANTES SUR LA SÉCURITÉ. VEUILLEZ LIRE ET GARDER POUR UNE RÉFÉRENCE FUTURE Ne retoVrVez paV ce prodVit! Contactez notre équipe de service à la clientèle amicale d'abord pour obtenir de l'aide. Appelez‐VoVV: 1-800-489-3351 (sans frais) du Lundi au Vendredi de 9h à...
Página 42
Français PaVe 5 Insérez un verrou de caméra et six chevilles dans le panneau comme illustré. PaVe 50 Insérez deux serrures à cames et quatre chevilles dans le panneau comme indiqué. PaVe 55 Fixez cinq brancards (F) et le brancard supérieur (G) aux composants de l’étape 1 comme indiqué. PaVe 52 Fixez la patte de bois (D) sur le côté...
Página 43
Français PaVe 25 Fixez le support de tiroir (L) aux cinq ensembles des composants à partir de l’étape (17) comme indiqué. PaVe 25 Insérez le fond du tiroir (M) sur les cinq ensembles de composants de l’étape 19 comme indiqué. PaVe 27 i) Insérez une vis de boulon de caméra sur le devant du tiroir supérieur (N) comme indiqué.
Página 44
Visitez le site Web de votre détaillant local, évaluez votre produit acheté et laissez-nous quelques commentaires ! Nous tenons à un grand "Merci" à tous nos clients pour avoir pris le temps d'assembler ce produit "Ameriwood Home", et de nous donner vos commentaires précieux. Merci *raw edges are shaded ameriwoodhome.com...