Resetting To The Factory Default Settings - Axis M10 Serie Guia De Instalacion

Ocultar thumbs Ver también para M10 Serie:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

AXIS M10 Series
Other methods of setting the IP address
UPnP™
Bonjour
AXIS Dynamic
DNS Service
ARP/Ping
View DHCP server
admin pages

Resetting to the Factory Default Settings

To reset all parameters and the IP address to Factory Default settings:
1.
Disconnect power from the camera.
2.
Press and hold the Control button and reconnect power.
3.
Keep the Control button pressed until the Status indicator flashes
amber (this may take up to 15 seconds).
4.
Release the Control button. When the Status indicator displays
green (which can take up to 1 minute) the process is complete and
the camera has been reset.
Use in
Notes
operating
system
Windows
When enabled on your computer, the camera
(ME or
is automatically detected and added to "My
XP)
Network Places."
MAC OSX
Applicable to browsers with support for
(10.4 or
Bonjour. Navigate to the Bonjour bookmark
later)
in your browser (e.g. Safari) and click on the
link to access the camera's web pages.
All
A free service from Axis that allows you to
quickly and simply install your camera.
Requires an Internet connection with no HTTP
proxy. See www.axiscam.net for more
information.
All
See user's manual. The command must be
issued within 2 minutes of connecting power
to the camera.
All
To view the admin pages for the network
DHCP server, see the server's documentation.
Page 19

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

M1011M1011-wM1031-wM1054

Tabla de contenido