AUMA Belle Epoque Manual De Usuario página 26

Tape -> USB Recording:
sette into cassette slot, play the cassette which will be recorded. Press RECORD button to start recording,
USB and REC will flash on the screen. Press STOP button to stop recording when you finished recording.
Vinyl -> USB Recording:
Phono which will be recorded, set the tone arm to the right place. Press RECORD button once to start re-
cording, press STOP button to stop recording when you finished recording. NOTE: Recording will be failed
if press STOP button during the recoding.
Delete tracks from USB drive:
FUNCTION button to select USB mode. During USB playing mode, press and hold the DELETE button on
remote about 2 se- conds to delete the current playing track in USB. NOTE: Press and hold the DELETE
button one time can only delete one track.
• Turn on the system and set the volume to a low level. Press the FUNCTION button to enter FM mode.
• Connect the FM antenna onto the 75 ohm socket at the back of the unit, press the SCAN button to start
auto-search the FM stations.
Or rotate the TUNER/SELECT control to tune the desired radio station. If you tune to a FM stereo sta-
tion, the "stereo" will show on the display. If you tune to a weaker FM station, the reception will auto-
matically switch to mono. You may press the TUNER/SELECT control to change Stere or Mono mode.
• During FM working mode, press the INFO button to see the following information on the screen: Pro-
gram Type/ Program No/ AUDIO/ TIME/ DATE, etc.
• During FM working mode, press the MENU button to set "Scan setting". Rotate theTUNER/SELECT
control one time and the "Scan setting All station" will show on the screen, press the TUNER/SELECT
control to confirm. Press the SCAN button in FM mode, the player will scan all of the FM stations.
• Rotate the TUNER/SELECT control secondly and the "Scan setting strong stations only" will show on
the screen, press the TUNER/SELECT control to confirm. Press SCAN button in FM mode, the player
will scan the FM stations with strong signals only.
• When you finish listening, press and hold the POWER button for 3 seconds to turn the system off.
• Turn the system on and set the volume to a low level. Press the FUNCTION button to enter DAB mode.
• Connect the DAB antenna onto the antenna socket at the back of the unit, the player will scan the DAB
station automatically till receive the DAB stations are received.
• Rotate the TUNER/SELECT control to choose the DAB stations manually. Choose the desired DAB sta-
tion and press the TUNER/SELECT control to confirm to play. If you tune to a DAB stereo station, the
"stereo" will show on the screen.
• In DAB mode, press INFO to see further information on the playing DAB station on the screen, i.e Pro-
gram Type / Program No. / Frenquency Range / Signal Strength / Time / Date etc.
26
Plug USB drive into USB socket. Then press the TAPE button, place the cas-
Plug USB drive into USB socket. Then press the PHONO button, play the
Plug U DISK into USB socket. Then press CD/USB button and press
Radio
DAB Radio (10029995, 10030660)