U.S.Robotics USR7500 Guía Breve De Instalación página 9

I have installed my multi-function printer, but my fax and scanner capabili-
ties do not work.
Possible Solution:
If you have a multi-function printer (printer/fax/scanner) connected to the USB Print Server, only
the printer functionality will work. If you want to use the other features of your multi-function
printer, it must be connected directly to a computer.
I tried to install the software for Peer-to-Peer printing, but received an error
message and the installation was aborted.
Possible Solution:
If you have previously installed the USB Print Server software, you will need to uninstall it before
you can install the Peer-to-Peer software. Click Windows Start, Programs, and then U.S. Robotics
Print Server. Select Uninstall USB Print Server Driver and then follow the on-screen instructions.
When the uninstallation is complete, you will need to reboot your computer. You will then be able
to install the Peer-to-Peer software.
Some printing jobs do not print correctly.
Possible Solution:
Make sure you have the correct driver for your printer installed on each computer on your net-
work. Refer to the documentation for your printer to verify this information.
Possible Solution:
If you are using an older, low speed printer, you may need to change the Handshake Signal con-
figuration setting. Click Windows Start, Programs, and then U.S. Robotics Print Server. Select Bi-
Admin Mangement Utility. Click the Configuration icon and then click the Port tab. Change the
Handshake Signal to Busy & Ack and then click OK.
Possible Solution:
Your printer may be configured to start printing after the first page is spooled, which can cause
printing problems in certain applications. You will need to change this setting.
Windows 98, NT, and Me users: Click Windows Start, Control Panel, and then Printers. Select
your printer and then click File, Properties, and then Details. Click the Spool Settings button,
select Start printing after last page is spooled, and then click OK.
Windows 2000 users: Click Windows Start, Settings, and then Printers. Right-click your printer,
click Properties, and then click the Advanced tab. Select Start printing after last page is spooled
and then click OK.
Windows XP users: Click Windows Start and then Printers and Faxes. Right-click your printer,
click Properties, and then click the Advanced tab. Select Start printing after last page is spooled
and then click OK.
5