Publicidad
Idiomas disponibles
Idiomas disponibles
Thermo Sensor Unit Appearance.
D1: Transmission Indication LED
D3: Wall Mount Hole
D5: Battery Compartment
D7: "TX" button
D9: Temperature Sensor Probe and Plug
Set Up:
Insert batteries.
Use a pin to press the RESET (B12) button
Weather Forecast Function:
After Batteries inserted, or holding "WEATHER" button (B7) for 3 seconds, Weather Icon
(A11) blinks. Enter the current weather condition by pressing "▲ " (B8) or "▼ " (B9) buttons.
Press "WEATHER" button (B7) to confirm the setting. The weather forecast may not be
accurate if the current weather condition entered is not correct.
The current weather status should be entered again if the altitude of the weather station is
changed. ( Barometric pressure is lower at higher altitude location. Therefore, altitude change
will affect the weather forecast) The weather station will start the first forecast at 6 hours
after the current weather status is entered. The weather station will start the first forecast at 6
hours after the current weather status is entered
D2: Outdoor Temperature
D4: Channel Select Switch
D6: °C/°F" button
D8: Stand
4
Publicidad
