Create Message; Play Message; Program Message Sequence - Stalwart Y951 Manual De Instrucciones

Telephone Helpline: 0845 146 2887 (United Kingdom)

Create Message

Press the EDIT button.
1.
Note: The last message will be displayed. Press the DOWN button to delete the entire
message or the ERASE button to delete character by character.
Enter the message using the alphanumeric keys on the remote:
2.
• Press key repeatedly to advance through the characters on the key
• Leave 1 second between key presses to use the same key again
• Press the SPACE button to insert a space
• Press the SHIFT button to change case
• Press the LIBRARY button followed by the library number to insert a pre-programmed word/
phrase, (see 'Appendix: Library Messages' for details)
Note: Maximum message length is 80 characters. ALL messages stored in the memory
cannot exceed 470 characters.
Press the STORE button followed by the desired memory button (M0-M9) to store the message in that
3.
memory location. Library locations CANNOT be overwritten.
Press the relevant memory button to recall the message and:
4.
Press the PLAY button to review the message
OR
Press the EDIT button to change the message
OR
Press ERASE and then DOWN to delete the message
OR
Press the STORE button followed by the BANNER button to assign the message to the BANNER button.
Note: Use the ERASE button to scroll back through the message when editing. This does
mean that characters are deleted.
Note: This appliance has a filter that prevents the use of certain obscenities, which are
displayed as '****' if saved to the memory.

Play Message

• Press the relevant Memory button (M0 to M9) to play the message stored to it.
• Press the LIBRARY button followed by the library number to play that stored message.
• Press the BANNER button to play the message stored to it.
• Press the ONLY button to play the currently selected message continuously.
• Press the MIRROR button to play the message backwards.

Program Message Sequence

Up to 16 messages from the memory can be played in sequence. To program the sequence:
Press the SETUP button followed by ERASE to delete any messages already stored in the sequence.
1.
Play the desired messages in the correct order from the memory/library.
2.
Press PLAY once to play the sequence once, or twice to play the sequence repeatedly.
3.
To save the message sequence press SETUP followed by STORE.
4.
To cancel the message sequence press the CANCEL button.
5.
.
UK
4