Digi XLR PRO Guia De Inicio Rapido

1 — Verify kit contents
1
2
5
3
6
7
1 — XLR PRO (North America)/XLR PRO INTL
(International)
2 — Power Supply
3 — Network (RJ45) Cable
4 — Antenna
5 — RJ45/DB9F Adapter
6 — Mini USB Cable
7 — XLR PRO INTL: Power plug adapter kit
© 2016 Digi International Inc. All rights reserved.
Digi, Digi International, and the Digi logo are trademarks or registered trademarks of Digi International Inc. in the United States and other countries worldwide. All
other trademarks mentioned in this document are the property of their respective owners.
Part number: 90002204-88 D
2 — Identify front panel
connectors, LEDS, and
Reset button
4
1 2 3 6
7
4
5
9
8
1/2 — Ethernet Port 1/Ethernet Port 2
3 — Mini USB
4 — Serial Data In LED
5 — Serial Data Out LED
6 — Serial Port
7 — Link Margin Indicator LEDs
8 — Power LED
9 — Reset Button
10 — DC Power Jack
WARNING! Use the serial port for serial
connections only. Do not connect the serial RJ45
port to any PoE (power over Ethernet) device.
Doing so could permanently damage the XLR PRO
or PoE device and void your XLR PRO warranty.
Quick Start
3 — Next steps
10
XLR PRO product page: For additional XLR PRO
product information, go to www.digi.com/xlrpro.
Quick setup: To quickly set up a pair of
XLR PROs to test over-the-air (OTA) data
transmissions, see the XLR PRO Getting Started
Guide.
Advanced configurations and more: To get
details on all XLR PRO features and learn how to
configure XLR PROs to suit your site
requirements, see the XLR PRO User Guide.
4 — Getting help
For assistance, contact Digi Technical Support:
• Telephone:
8:00 am - 5:00 pm—U.S. Mountain Time
U.S.A. & Canada 877.912.3444
Worldwide +1 952.912.3456
• Online: www.digi.com/support/eservice/
XLR PRO
Guide