Power On/Off - Denver ASA-30 Manual Del Usario

Power on / off
Power on
The siren is powered off as per default settings. Plug the siren to a 110-
220V socket and you hear a beep: the siren is on. You can also turn the
siren on by long pressing (6 seconds) the Power button on the siren.
Enter Setup Mode / Power off
Enter Setup Mode by pressing the Power button once. Press again the Power
button for 6 seconds to turn the siren off.
Siren and light indications
When arming the system
The siren beeps once, the LED lights blink once and switch on.
When disarming the system
The siren beeps twice, the LED lights blink twice and turn off.
When armed / disarmed in Mute Mode from the control panel
The siren does not beep, the LED lights do not blink.
5