nedis WIFICBO20WT Guia De Inicio Rapido página 6

acetone when cleaning the product.
• Do not remove a cell or battery from the original packaging until required for
use.
• Do not use any cell or battery that is not designed for use with the product.
• Use only the cell or battery in the application for which it was intended.
• Wipe the cell or battery terminals with a clean dry cloth if they become dirty.
• Battery usage by children should be supervised.
• Observe the plus (+) and minus (–) marks on the cell, battery and equipment
and ensure correct use.
• Dispose of the cell or battery properly.
• Seek medical advice immediately if a cell or a battery has been swallowed.
• Only use the provided USB cable
• Consult the local laws and regulations for this product before installing and
using.
Preparing the security camera
1. Slide the lock switch A
2. Insert a microSD card (not included) into the microSD card slot A
3. Insert the required batteries into the battery compartment A
-
Observe the plus (+) and minus (–) marks on the cell, battery and equipment
and ensure correct use.
4. Plug the micro USB cable A
5. Plug the other end of A
6. Connect the USB power adapter to a power outlet to charge the camera.
7. Press and hold the power button A
The status indicator LED A
Installing the Nedis SmartLife app
1. Download the Nedis Smartlife app for Android or iOS on your phone via
Google Play or the Apple App Store.
2. Open the Nedis Smartlife app on your phone.
3. Create an account with your mobile phone number or your e-mail address
and tap Continue.
You will receive a verification code on your mobile phone or e-mail address.
4. Enter the received verification code.
5. Create a password and tap Done.
6. Tap Add Home to create a SmartLife Home.
7. Set your location, choose the rooms you want to connect with and tap Done.
2 to open the product.
into the micro USB port A
t
into a USB adapter (not included).
t
e for 5 seconds to switch on the product.
starts blinking.
6
6
.
q
r .
8 .