Audio Setup Page; Video Setup Page - Soundstream H-500Di Manual De Instrucciones

Screen Saver
On
The screen saver starts up if nothing is played
and no operations are performed for 4 minutes.
Off
The screen saver does not start up.
Last Memory
On
Select this to make last memory function
available.
Off
Select this to disable last memory function.

Audio Setup Page

Downmix (Analog Audio)
LT/RT
5.1 channel audio is mixed into left channel
and right channel and is output via FL and FR
speakers respectively.
Stereo
5.1 channel audio is mixed into stereo signal and
is output via the FL and FR speakers.
Off
Select this to disable this function.
Note:
Only for Dolby AC-3 encoded 5.1- channel discs.
Reverb Mode (3D Processing)
This setting provides following sound effects:
Off, Concert, Living Room, Hall, Bathroom,
Cave, Arena, Church

Video Setup Page

Quality
You can adjust some parameters of video picture.
1 Highlight "Quality" and press the
2 Use the / buttons to select the parameter.
 
Sharpness
This adjusts the sharpness of the picture shown
on the monitor.
Select High, Medium or Low using the Cursor
buttons, and press the ENTER button.
Brightness
This adjusts the brightness of the picture.
Use the left and right buttons to change the
value, and press the ENTER button.
Contrast
This adjusts the picture contrast.
Use the left and right buttons to change the
value, and press the ENTER button.
Gamma
This adjusts the gamma value of the picture.
Select High, Medium, Low or None using the
Cursor buttons, and press the ENTER button.
button.

14
Hue
This adjusts the green/red balance of the picture
(only for progressive-scan and S-Video output).
Use the left and right buttons to change the
value, and press the ENTER button.
Saturation
This adjusts the saturation level.
Use the left and right buttons to change the
value, and press the ENTER button.
3 Press left button (

Page.
HDMI Setup
On (HDMI)
Select this to have the signal output when your
TV or monitor is connected to the HDMI out
terminal.
Off (HDMI)
Select this when you do not use the HDMI out
terminal.
No signal is output from the HDMI out terminal.
AUDIO FORMAT
AUTO
Detect and select the best supported audio format
automatically.
PCM
Multi-channel audio format will be down-mixed to
two channel sound.
RESOLUTION
The resolution options include 480p(60Hz),
7 2 0 p ( 6 0 H z ) , 1 0 8 0 i ( 6 0 H z ) , 1 0 8 0 p ( 6 0 H z ) ,
576p(50Hz), 720p(50Hz), 1080i(50Hz) and
1080p(50Hz).
CEC SETUP
You can use one single remote control to control
HDMC-CEC devices that are connected through
HDMI connectors.
Note:
To enable the HDMI CEC feature, you must turn on
the HDMI CEC operations on the TV and on other
devices connected to TV. Refer to TVs/devices
manual for details.
HDMI-CEC
On
Select this to turn on the HDMI CEC function.
Off
Select this when you do not use the HDMI CEC.
One-Touch Play
On
Press button to turn on this product. TV (if the
TVsupports one-touch play) will turn on auto-
matically and switch to the correct video-in chan-
nel. If a disc is loaded in this product, disc play
automatically starts (Except CD).
Off
Select this to turn off one-touch play function.
) to return to the Video Setup