Polar CM359 Manual De Instrucciones página 4

Operating you wine chiller
NB: the chiller should be placed in an area where the ambient temperature is between 16-35°C

When using the chiller for the first time, or re-starting it after a long period of time, there
may be a few degrees variance between the selected temperature and what is shown on the
LED readout. Once the chiller has been switched on for a few hours, this should rectify itself

If the unit is unplugged, has lost power or been turned off, wait 3 to 5 minutes before
restarting the chiller.
The controls of your wine chiller
Power (to switch on/off button must be held for 5 seconds)
Light To control the inner light on/off
Up Used to increase the temperatures by 1°C
Down Used to decrease the temperature by 1°C
Select the temperature display setting in Fahrenheit or Celsius
& pressed simultaneously will lock / unlock the control panel. When locked control panel
will be disabled.
Wine Indicator Lights
Red LED for red wine
Setting the temperature control
1) When using the temperature controls for the first time, the LED will display the previous
temperature (the factory settings are 12°C)
2) The temperature setting is adjustable with the range 5-22°C .
3) The temperature increases by 1°C or 1°F if you touch the UP button once, and will decrease by
1°C or 1°F if the DOWN button is touched once
4) When storing mainly red wine, the temperature should be set at 15-18°C, and the red LED will
be lit
5) When storing mainly white wine, the temperature should be set at 9-14°C, and the green LED
will be lit
Green LED for white wine Amber LED for sparkling wine