Recalling Measurements In Memory; Clearing Measurements In Memory - MABIS Deluxe SmartRead Manual De Instrucciones

Recalling Measurements in Memory

You can recall up to 60 measurements plus an average of the last three (3)
measurements stored in the memory. These measurements can be shared
with your physician or trained healthcare professional.
1. Press the 'MEM' button. The first reading displayed is the averages of
the last three (3) measurements stored in memory. The letters 'AVG' will
appear on the display, Fig. 1.
2. Continue to press the 'MEM' button to view the next previously stored
measurement, Figs. 2-3.
NOTE: The memory bank can store up to 60 readings. When the number
of readings exceeds 60, the oldest data will be replaced with the new
record.
Fig. 1 Fig. 2 Fig. 3
16

Clearing Measurements in Memory

With the unit turned off, press and hold the 'MEM'
button until 'CLR' appears on the display, Fig. 1. This
function will clear the memory of all previously stored
measurements.
NOTE: The unit must be powered off before the
memory can be cleared.
Fig. 3
17