How To Use; Getting Started; Connecting The Attachments; Using The Attachments - Juiceman HB0001S Manual De Instrucciones

How to Use

This product is for household use only.

GETTING STARTED

• Remove all packing material and, if applicable, any stickers from the product;
remove and save literature.
• Please go to www.prodprotect.com/applica to register your warranty; for
additional information go to www.juiceman.com.
• Wash all removable parts as instructed in CARE AND CLEANING. This will
remove any traces of dust or residue left from manufacturing and shipping.
Important: The blades on the attachments are extremely sharp. Use caution
when handling.
• Wipe motor body with a damp cloth or sponge to remove any dust. Mild dish
soap may be used, but avoid abrasive cleaners. Wipe dry with a soft cloth or
paper towels.
Important: Do not rinse or immerse motor body in water or any other liquid.

CONNECTING THE ATTACHMENTS

Always be sure the appliance is unplugged before connecting or removing any
attachments.
Blending & Whisk Attachments
• To attach the blending or whisk attachment, insert
the attachment so the UNLOCK
attachment is lined up to the dash on the motor
body.
• Turn the attachment until the two pieces are lined
up in the LOCK
• To remove the attachment, twist until the UNLOCK
B
dash on the motor body. Pull the pieces apart.
Chopping Workbowl
• Holding the chopping/grinding blade by the center
post; insert it, blade down, into the workbowl (C).
Important: The chopping blade is extremely sharp.
Use caution when handling.
• Place the lid on top of the workbowl.
• Place the motor body over the lid so that the
UNLOCK
C
with the dash on the motor body.
6
symbol on the
position (B).
symbol on the attachment is lined up with the
symbol on the workbowl is lined up
• Turn counterclockwise until the two pieces are
lined up in the LOCK
• To remove the motor body, twist the handle
clockwise until the UNLOCK
workbowl is lined up with the dash on the motor
body. Lift off the motor body and remove the lid of
the workbowl.
D

SELECTING A SPEED

1. Select a speed – from 1 to 5 – using the speed
control dial on the top of the motor body (E).
Note: The speed can be changed at any time whether
the appliance is turned on or off.
E
2. Press the POWER
at the selected speed. The blender turns OFF when
the button is released (F).
Note: To pulse, press and release the POWER
button at 5-second intervals.
F
3. For an extra burst of power while blending, there
is a POWER BOOST button just below the Power
increase speed and maneuver through thicker
mixtures. The appliance will turn OFF when this
button is released (G).
G

USING THE ATTACHMENTS

Using the Blending Attachment
This attachment is used for blending a variety of foods, including soups, sauces,
salad dressings and powdered drinks into a smooth mixture without lumps
directly in the sauce pan, measuring cup, beaker or bowl. This appliance mixes,
blends, purees and stirs while adding very little air to the mixture.
position (D).
symbol on the
button to turn the blender ON
button. This feature allows the appliance to
7