Operation Features; Cleaning; End Of Life Disposal - Joerns Oxford Low Profile Weigh Scale Manual De Instrucciones

Oxford
®
Low Profile Weigh Scale

5. Operation Features

• All functions are accessible to the user without opening the case.
• Starting or zeroing the scale is done through a single touchpad located on the front of the case.
• Stable readings are achieved through digital averaging. Once the digital display has stabilised,
the stable weight will be held. To make the scale active again, push the ON/ZERO pad
momentarily. The held weight is stored in a non-volatile memory for later recall if required.
• Display turns off after
• Recall of the last held weight is available by pressing the RECALL pad. This allows a reading of
the last patient's weight, after the patient has been removed from the scale.
• Battery change is made easy with external access to the battery holder.

6. Cleaning

Clean with ordinary soap and water and/or any hard surface disinfectant. Harsh chemical
cleaners or abrasives should be avoided as these may damage the surface finish of the product.
Avoid wetting any of the electrical parts. After cleaning, the unit should be thoroughly dried.
Do not scratch the display window.
Do not immerse the Weigh Scale in liquid or spray liquid directly on the unit.
Do not use pressurised water or steam on the weigh scale.

End of Life Disposal

Battery: All batteries in the product and any accompanying accessories must be recycled
separately. Batteries should be disposed of in accordance with local or national regulations.
Slings: Slings and associated material accessories should be sorted as combustible waste in
accordance with local or national regulations.
8
60 seconds of inactivity to conserve battery life.
CAUTION
English