Mounting; Mounting/Wiring Method, Wiring Distance - Aiphone GT-AC Manual De Instalacion Y Uso

MOUNTING

The illustrations below use the GH system.
3
4
to GT-AC
to GT-AC

MOUNTING/WIRING METHOD, WIRING DISTANCE

Relay
Automatic gate
Relay
or
Electromagnetic Electric
door lock door strike
4
1
2
D A
Power supply
2
2
B
2
2
2
2
C
1. Fix the mounting bracket to the back (or surface-mount)
box.
2. Connect the wires to the unit.
3. Mount GT-AC to the front frame.
• Mount GT-AC from behind the front frame.
• Insert the notch into the slots on both sides.
4. Options
a.Rain hood
b.Hooded surface-mount box
c.Surface-mount box
* For details on mounting panels and modules other than
the GT-AC, refer to the GF, GH or GT Installation and
Operation Manual.
(Wiring distance)
Power supply
AC/DC12 ~ 18V
A
AC/DC18 ~ 24V
B
C
Request to exit/entry
The connection distance will depend on
button
the specifications of the electric door strike,
relays or Electromagnetic door lock to be
Request to exit/entry D
connected. To determine the operating range,
button
please refer to the specifications of each
terminal.
Timer
(*1) U se a separate power supply for the GT-AC, not
the ones used to power the system.
(*2) T wo relays can be activated from GT-AC.
However, only one relay can be activated from a
residential station.
diameter 0.65 - 1.0 mm (22-18AWG)
100m (330')
(Less than)
300m (980')
- 300m (980')
- 300m (980')