Measuring Procedure - GVS BP3BU1-4U Instrucciones De Uso

on the inside of the wrist.
b) The distance between the cuff and the
hand should be approx. 10 mm (1/2").
c) Secure the cuff with the Velcro fastener,
so that it lies comfortably and not too
tight. No space should remain between
the cuff and the wrist.
d) Lay your arm on a table, with the palm
upwards.
Support the arm a little with a cushion, so that the cuff rests at about the
same height as the heart. Remain still for 2 minutes, before beginning the
measurement.

5.4. Measuring procedure

After the cuff has been appropriately positioned, and you've selected User
1 or User 2, the measurement can begin:
a) If you want to take an Average Mode
measurement position the slide switch to
the 3. Remember, in this mode, the unit
takes 3 measurements (one after another)
and calculates the result. There is a 15
second rest time between measurements.
The unit beeps five seconds before each
upcoming measurement.
(Data obtained in Average Mode are indi-
cated by the MAM symbol.)
13