Installing The Turntable; Operation Instructions - Sunbeam Products RIVAL RGTM701 Manual Del Usuario

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

INSTALLING THE TURNTABLE

Never place the glass tray upside down.
The glass tray should never be restricted.
Both the glass tray and turntable ring assembly must always be used during cooking.
All food and containers of food should always be placed on the glass tray for cooking.
If the glass tray or turntable ring assembly cracks or breaks, contact your nearest authorized service center.

OPERATION INSTRUCTIONS

If you want to pause a cooking program, please press STOP/CANCEL pad once, then press START/+30 SEC. pad to
restart the cooking program, but if you pressSTOP/CANCEL pad twice, the cooking program will be canceled.
SETTING THE CLOCK
In standby mode, press CLOCK pad.
1.
Use the number pads to enter the correct time.
2.
Press CLOCK pad again.
3.
NOTE: This is a 12 hour clock. When the oven is first plugged in or when power resumes after a power
interruption, the display will show 0:00. During cooking, you can press CLOCK pad to check the present time.
SETTING THE OVEN TIMER
In standby mode, pressKITCHEN TIMER pad.
1.
Enter the amount of time by pressing the number pads.
2.
Press START/+30 SEC. pad to start the program.
3.
NOTE: The longest time you can set is 99 minutes and 99 seconds. You can cancel the function by pressing
STOP/CANCEL pad.
SETTING A COOKING PROGRAM
A.
One-stage Cooking
Place food into oven and close the door.
1.
Press TIME COOK pad.
2.
Use the number pads to set cooking time.
3.
Press POWER pad.
4.
Use the number pads to enter power level.
5.
Press START/+30 SEC. pad to start the program.
6.
8

Publicidad

Capítulos

Tabla de contenido
loading

Este manual también es adecuado para:

Rival rgtm702

Tabla de contenido