Bimar PA97 Folleto De Instrucciones página 20

 The plug point must be accessible so as to easily remove the plug in case of an
emergency.
 Stand the appliance on a flat, horizontal and stable surface, and keep it away from:
- fans
- heat sources (e.g. open flames, gas stoves, fire places etc.), flammable gasses or
explosive materials
- liquids (e.g. from bathtubs, showers, sinks etc.) to avoid splashing water and to
prevent it from falling into them (the appliance should be kept a minimum of 2
metres away).
- fabrics (curtains, etc.) or floating materials/particles that may block the aspiration
grid; check also that the front part is free from floating particles (dust, etc.).
 If there is a fault or the appliance is not working correctly, switch it off and have it
checked by a qualified professional. Repairs done by an unqualified person can be
dangerous and cause the guarantee to become void.
DESCRIPTION
Smart device with integral wi-fi, usable via Smartphone using an app with Android or
iOS operating systems.

Purifier
communication via an App.

App (application) allowing remote control of the following device functions: (On-
standby); adjustable air flow, "Change filter" warning light, Mode: Normal/ Sleep,
Light with colour effects, steady or off, ioniser.

Check that the router is for domestic use (i.e. it does not have any access
restrictions except the password), that the wi-fi network is 2.4G Hz, and that
there is a strong, uniform wi-fi signal in the room where the device is to be
installed.

Make sure that the smartphone is connected to the wi-fi network to be used for
the purifier.
1.1 First Installation/Setup
1. Install the "BIMAR life Smart" App by downloading it from Google Play
(Android) or AppStore (iOS), or scan the QR code provided here to install. The
free "BIMAR Live Smart" app is compatible with devices which support iOS 8.0
or above or Android 4.4 or above.
For Android
electronics with integral wi-fi
For iOS
20/64
allowing Smartphone-purifier